BRS-Printers-Mod

BRS-Engineering

Specific Products (L3VER tensionner / Enclosure Plates / Prototypes)

In this section you will find specific products, not shared on the regular CAD side. It can be bought at BRS Shop. As prototyping is time hungry and expensive, this is a mean for you to participate further in the next developments ;)

L3VER M3 AWD TENSIONNER

The M3 replace the front idlers blocks, adding tensionner and AWD feature in one part and in a low profile

Product	Status	View	Manual EN	STL+STEP	Release date	Shop Product	More	License
AWD301/1 Drive with L3VER M3 Tensionner module	ACTIVE	FOR VCORE3.0/3.1 with 1.0 Enclosure AWD and belt tensionner module all in one, Only for VC3.0/3.1 with stock frame or enclosure 1.0	BOM Manual incoming	STEP STLs	02/04/24	SHOP	CAD
AWD301/2 Drive with L3VER M3 Tensionner module	ACTIVE	FOR VCORE3.0/3.1 with 2.0 Enclosure AWD and belt tensionner module all in one, Only for VC3.0/3.1 with stock frame or enclosure 2.0	BOM , Manual incoming	STEP STLs	28/04/24	SHOP	CAD

L3VER M1 TENSIONNER (3.0 / 3.1)

IF you dont want to change the motor bracket, (very simple installation) Good for already working machines

Product	Status	View	Manual EN	Release date	Shop Product	Shop CAD	License
L3VER M1 1.0 (A1.1) Tensionner module	Active	L3VER M1 1.0 A1 Tensionner A full Vcore 3 compatible manual tensionner block removing the need of the EVA tensionner, can open the compatibility for the upcomming VZ-Bot Al/CF Toolhead set, and the next Flathead V3 iteration. NEED D5M4 Shoulder bolt	Download	01/06/22	SHOP	Shop CAD
L3VER M1 1.1 (A1.6) Tensionner module	Active	L3VER M1 1.1 A1 Tensionner A full Vcore 3 compatible manual tensionner block removing the need of the EVA tensionner, can open the compatibility for the upcomming VZ-Bot Al/CF Toolhead set, and the next Flathead V3 iteration. NEED D5M4 Shoulder bolt, This is a revised version from the 1.0, more dense, few parts less, same performances	Download	01/05/23	SHOP Soon	Shop CAD Soon

PMB Original (Reuploaded)

A full conversion of the stock rear Vcore 3.0/3.1 motor block to secure the shaft with Pulley. Original mode made in August 2021, deprecated with the L3VER M2 which was the upgrade of it, but still useful with a L3ver M3 setup

Original and AWD version available

Product	Status	View	Manual EN	Release date	Printable	Shop CAD	License
PMB Original Stock	ACTIVE	PMB 1.0 Stock Reinforced rear motor block for a secured nema shaft and a shoulder bolt driven bearings for the best precision and reliability. Works with L3VER M1 (Not compatible with L3ver M2		10/08/21	Files
PMB Original for AWD layout	ACTIVE	PMB 1.0 AWD Reinforced rear motor block for a secured nema shaft and a shoulder bolt driven bearings for the best precision and reliability. Works with AWD Drives 1.35, L3VER M3and l3ver M1 (Not compatible with L3ver M2)		08/07/24

L3VER M2

A more drastic integration, lower profile, with an upgraded motor block design to dampen the motor vibrations and noises, and reinforced shaft for more longevity and precision.

-The classic M2 in place of the rear stock block

Product	Status	View	Manual EN	Release date	Shop Product	Shop CAD	License
L3VER M2 A1 Tensionner module	ACTIVE	PMB 2.0 L3VER M2 Tensionner A full Vcore 3 compatible manual tensionner block merged with the PMB mod, removing the need of the EVA tensionner, can open the compatibility for the upcomming VZ-Bot Al/CF Toolhead set, and the next Flathead V3 iteration. NEED D5M4 Shoulder bolt	Download	22/06/22	SHOP	Shop CAD
L3VER M2 A2 Tensionner module	ACTIVE	PMB 2.0 L3VER M2 Tensionner First revison,adding the SKL tops, adding NEMA23 compatibility holder (need to swap the electronic bay plate to the front (VC3.x)	Download	21/02/23	SHOP	Shop CAD

Options for L3VER M1/M2/M3

IF you dont want to change the motor bracket, (very simple installation) Good for already working machines

Product	Status	View	Release date	Shop Product	License
M1/M2/M3 Knob	ACTIVE	Knob M1/M2 A handy knob to adjust the tension without using a tool! Works with all L3VER M1/M2 variations	16/10/2023	FREE on the STORE	NONE

L3VER M2 TENSIONNER enclosure plates Vcore 3.x (3.0 / 3.1)

Rear part is meant to be printed, the front one is to be cut (metal/PC)

Product	Status	View	Manual EN	Release date	Shop Product	CAD	License
M2 Enclosure plates 1.0	Active	M2 Enclosure plates A set of plates to close the rear electronic top for the M2 Lever. Has been designed with the Cpap hole but can be use with any layout you can add; Made for Vcore 3.x 200mm, 300mm, 400mm, 500mm, and 600mm	none	24/05/23	soon	CAD

L3VER M2 TENSIONNER WS7040 CPAP enclosure plates Vcore 3.x (3.0 / 3.1)

Product	Status	View	Manual EN	Release date	Shop Product	CAD	Credit
M2/WS7040 CPAP V1.1 - Enclosure plates	ACTIVE	M2/WS7040 CPAP - Enclosure plates A set of plates to close the rear electronic top for the M2 Lever. Has been designed with the Cpap hole but can be use with any layout you can add; This iteration use the excellent mod from my friend Dan Cernogorsky, named “RatRig V-Core WS7040 CPAP Fan Shelf Mount”, housing the CPAP fan and electronic in a dampered solution meant to reduce the sound of the turbofan, and ease the mounting of it. Made for Vcore 3.x 200mm, 300mm, 400mm, 500mm,	None	24/05/23	SHOP	STEP+STLs	CREDIT

L3VER M1+Refreshed TENSIONNER enclosure plates Vcore 3.x (3.0 / 3.1)

VC300

Product|Status|View|Manual EN|Release date|Shop Product| CAD | STL | License ——–|——|———————|—-|————— |————–|—————|—————|————— M1+refreshed Enclosure plates 1.0|Active| alt text
M1 Enclosure plates A set of plates to close the rear electronic top for the M1 and M1.1 refresh Lever.|none|soon|soon|CAD|soon |

VC400

VC500

Back to Main Page

This site is open source. Improve this page.